Details
For rubber, plastic and leather heels.
INSTRUCTIONS:
The heels of the shoes must be thoroughly dry and free from grease. Carefully mark the outline of the shoe heel on the plain side of the SOLTRACK Stick-on Heels and cut to shape with a pair of sharp scissors. Smoother the cut edges with the rougher tool provided. Brush off and loose particles of dust.
To open the adhesive pierce the seal. Using the folded roughing tool spread an even coat of adhesive over the roughened area of the shoe heel and leave for 15 minutes to dry. Then apply an even coat of adhesive to the SOLTRACK Stick-on Heel and a second coat to the roughened area of the shoe heel. Leave for 15 minutes when the adhesive will be in the correct condition for sticking.
Fit the Stick-on Heel on to the shoe heel in the required position. Press firmly together. Thoroughly press all over, especially around the edges. Leave for two minutes and then press round the edges again.
Leave the shoes for 8 hours before wearing.